TRITOguard
Tritoguard is a multilayer premium grade water proof protection sheet for Triton range of waterproofing systems. Once installed as per manufacturer’s recommendation Tritoguard will also act as an additional layer of waterproofing [TRITOGUARD S] for various applications particularly for buried ground waterproofing systems.
Fields of Application
Tritoguard has been designed for use as a permanent protection/drain membrane to Triton range of water proofing systems particularly TRITOFLEX. Once installed; Tritoguard will absorb site foot traffic and protect the waterproofing membrane from penetration by sharp edges or reinforced steel and rocks during the backfill process and late settlement.
Trito Therm
Tritotherm is fluid applied acrylic waterproofing and thermal insulating coating system, which can be applied on a variety of commonly, used construction substrata. The sodium borosilicate hollow ceramics spheres present in Tritothermprevent the conduction of heat thereby creating thermal as well as sound barrier. All three important properties of heat insulation, sound barrier as well as waterproofing are available in one product.
Characteristics
- Non-Toxic, Water borne and energy saving
- Mildew, UV and Weather Resistant
- Easy application by roller, squeegee or spray
- Added advantage of corrosion inhibitors in the formulation
- Excellent adhesion to common construction substrata
- Excellent chemical resistance
- Thermal Insulation, Sound Barrier and Waterproofing- all in one can be applied to dump surfaces.
- Will not support growth of bacteria or algae, providing a hygienic finish.
- Highly flexible nature reduces damage from impact to minimum. Withstands movement of substrate due to temperature fluctuations.
Trito Flex
Tritoflex is a fast-setting liquid rubber that is water-based and environmentally safe. It is a tough yet extremely flexible material that can be efficiently sprayed to any thickness in a single pass creating a fullyadhered, monolithic waterproofing membrane with no waste. Since it is water-based with no VOC’s it is considered a “green” product that is sustainable for years as a waterproofing system.
Installation
Surface preparation is generally limited to pressure washing or compressed air cleaning for Tritoflex to bond to. Tritoflex can be spray applied quickly at 100 sqm. Per hour per sprayer, reducing crew size and job time. Although Tritoflex is UV stable and weather resistant, it is black in color so it is typically coated with an energy efficient white acrylic coating Tritocryl or Tritotherm also supplied by Triton, Inc. Tritoflex is lightweight so it can be applied directly over an existing roof system, eliminating the need for wasteful and costly tear-off.
Trito Coat
Tritocoat is an elastomeric liquid membrane that is water-based and environmentally safe. It is a tough yet extremely flexible material that can be efficiently applied to any thickness by roller or squeegee creating a fully-adhered, monolithic waterproofing membrane with no waste. Since it is water-based with no VOC’s it is considered a “green” product that is sustainable for years as a waterproofing system.
Application
Tritocoat can be applied at a rate of 1.5ltr/ sqm or approximately 13sqm per 20ltr pail to achieve a dry film thickness of 1mm. Coverage may vary depending on the profile and texture of the substrate it is being applied and in general application conditions.
Trito Prime
Tritoprime is a quick drying solvent based low viscosity bitumen primer. It is used as a primer coat on masonry and concrete substrates to improve the adhesion of bitumen based membranes and coatings.
Tritoprime is low in viscosity, which allows it to penetrate into the concrete pores and improve the adhesion between the membrane and the concrete surface. In addition to that, the primer also acts as a binder for the dust particles which gets accumulated on the concrete surface even after cleaning.
Characteristics
- Improves the adhesion between bitumen based sheet membranes and coatings
- Cold applied, does not require heating
- Binder for dust particles
- As a curing compound on freshly cast concrete.
- Anti corrosive
- Conforms to the following standards
- ASTM D 41 – Asphalt primer for roofing, damp proofing and waterproofing
- BS 3416, Type A Class C – Bitumen based coatings for cold application, suitable for use in contact with potable water.
Trito Cryl
Tritocryl is a superior grade, single component, acrylic based, waterproof coating with excellent elastomeric properties. It is durable, flexible and has a high level of resistance to UV and harsh weathering conditions.
Fields of Application
- Can be used on most types of roofs, such as concrete, metal, asbestos etc.
- Waterproofing of car park decks.
- As a protective membrane for polyurethane foam insulation.
- As protection to exposed reinforced concrete from carbonation & chloride attack
-
-
Tweet
-